Skip to main content

SIMULATED Multifunction Keypad

Knob Replacement

  1. Loosen the two set screws that secure the knob to shaft to prevent interference with shaft.

  2. Place knob onto shaft leaving a 0.015-inch gap to to the faceplate.

  3. Tighten two set screws to fix knob to shaft.

  4. Loosen the two set screws that secure black pushbutton to shaft to prevent interference with shaft.

  5. Place black pushbutton onto shaft leaving appropriate clearance to knob.

  6. Tighten two set screws to fix black pushbutton to shaft.

  7. Confirm proper rotation orientation and firm fit.

In this section: